Filter
Sort:
Show:
HYDAC PRESSURE TRANSMITTER HDA 4400

HYDAC PRESSURE TRANSMITTER HDA 4400

HDA 4000, for mobile and stationary hydraulics, various interfaces (CAN, HART), Depending on version for explosive atmospheres with ATEX, CSA, IECEx approval, For applications with increased functional safety in acc. with EN ISO 13849-1 (PL d Cat. 3), With flush membrane, For shipbuilding and offshore with approval from: - American Bureau of Shipping - Lloyds Register of Shipping - Det Norske Veritas / Germanischer Lloyd - Bureau Veritas
Read more
DWYER WATER LEAK DETECTOR SERIES WD3

DWYER WATER LEAK DETECTOR SERIES WD3

By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
CAMILLE BAUER KINAX HW730/HW730-Ex Angle Transmitter

CAMILLE BAUER KINAX HW730/HW730-Ex Angle Transmitter

A robust, Ø78 mm, programmable hollow shaft angle transmitter
detects the angular position of a shaft without making contact with it and 
transforms the information into an impressed direct current proportional to the measured value.
Features:-
  • Hollow-shaft angle-of-rotation transmitter with a tough, weatherproof design.
  • Highest level of electrical and mechanical safety.
  • Advanced capacitive scanning system.
  • Easy axis or shaft mounting.
  • Installing a continuous shaft.
  • Enduring, upkeep-free, and simple to install.
  • Shake- and vibration-resistant.
  • Keys and switches can be used to parameterize the measuring range, rotational direction,   zero point, and characteristic curve (linear/V).
  • Analog output signal, 2-wire connector, 4...20 mA.
  • Independently adjustable zero point and span.
  • Due to the capacitive scanning mechanism, the absolute position is immediately available after turning on.
Read more
CAMILLE BAUER KINAX N702 Inclination Transmitter

CAMILLE BAUER KINAX N702 Inclination Transmitter

An angle proportional inclination is transformed into a DC signal using the KINAX N702. 
An analog current change (4–20 mA) that represents the output signal is accessible. 
There is little mechanical wear on the pendulum from the sensor, which is non-contact.

Features:-

  • Magnetoresistive inclination transducer
  • Digital interfaces CANopen
  • Robust aluminum housing
  • Protection class IP66
  • Oil damped pendulum
  • Pendulum shaft without mechanical stop
Read more
CS INSTRUMENTS VORTEX ULTRASONIC SENSOR VU570

CS INSTRUMENTS VORTEX ULTRASONIC SENSOR VU570

VU 570 - Vortex ultrasonic sensor for flow measurement

Independent of the gas composition, flow meters for technical gases and mixed gases.
The VU 570  helps you keep an eye on, control, and minimize your usage while 
improving sustainability. One sensor can be used to track your consumption 
of various gas compositions and gas types.
Read more
CS INSTRUMENTS FA 500-DEW POINT SENSOR

CS INSTRUMENTS FA 500-DEW POINT SENSOR

FA 500 - Dew point sensor with integrated display and alarm relay

  • Dew point sensor FA 500 from -80 to 20°Ctd.
  • For refrigeration, membrane, and desiccant dryers, the FA 500 is the perfect dew point sensor with an integrated display and warning relay.
Read more
CS INSTRUMENTS FA 550 -DEW POINT SENSOR

CS INSTRUMENTS FA 550 -DEW POINT SENSOR

FA 550 - Dew point sensor in robust die-cast aluminum housing ✓Robust dew point sensor for gases and compressed air ✓ The Dew point FA 550 is perfectly suited for measuring dew points outside and reliably does so even in punishing industrial settings. ✓Dew point measurement after adsorption dryers, membrane dryers, or refrigeration dryer in compressed air systems.  
Read more

Filter Products

Categories