Filter
Sort:
Show:
BALLUFF INDUCTIVE SENSORS BES008L

BALLUFF INDUCTIVE SENSORS BES008L

Pressure-rated inductive sensors

  • Pressure-rated up to 500 bar
  • High temperature-rated up to 120 °C
  • Appropriate for use in explosion-protected areas
  • Overall dimensions from M5 to M18
  • Short and long configurations
  • With and without fixed stop

Inductive standard sensors:

  • Cylindrical sensors in designs from M5 to M30 and various cuboid configuration
  • Variants for DC-3/4 wire, IO-Link and DC, AC and AC/DC 2 wire
  • Shielded and unshielded versions
  • Flush variants with ranges of up to 15 mm
  • Non-flush variants with ranges of up to 30 mm
  • Plug or cable connection
Read more
AECO VIBRATION LEVEL CONTROLS

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000
Read more
CS INSTRUMENTS VORTEX ULTRASONIC SENSOR VU570

CS INSTRUMENTS VORTEX ULTRASONIC SENSOR VU570

VU 570 - Vortex ultrasonic sensor for flow measurement

Independent of the gas composition, flow meters for technical gases and mixed gases.
The VU 570  helps you keep an eye on, control, and minimize your usage while 
improving sustainability. One sensor can be used to track your consumption 
of various gas compositions and gas types.
Read more
CS INSTRUMENTS FA 500-DEW POINT SENSOR

CS INSTRUMENTS FA 500-DEW POINT SENSOR

FA 500 - Dew point sensor with integrated display and alarm relay

  • Dew point sensor FA 500 from -80 to 20°Ctd.
  • For refrigeration, membrane, and desiccant dryers, the FA 500 is the perfect dew point sensor with an integrated display and warning relay.
Read more
CS INSTRUMENTS FA 550 -DEW POINT SENSOR

CS INSTRUMENTS FA 550 -DEW POINT SENSOR

FA 550 - Dew point sensor in robust die-cast aluminum housing ✓Robust dew point sensor for gases and compressed air ✓ The Dew point FA 550 is perfectly suited for measuring dew points outside and reliably does so even in punishing industrial settings. ✓Dew point measurement after adsorption dryers, membrane dryers, or refrigeration dryer in compressed air systems.  
Read more
Pilz Safety Relay PNOZ S2 C 24VDC 3no/1nc

Pilz Safety Relay PNOZ S2 C 24VDC 3no/1nc

Product ID: 751102. PNOZsigma safety relay (standalone), inputs: 1-channel wiring without detection of shorts across contacts, manual/automaticstart, outputs: 3 N/O, 1 N/C, 1 SC, UB 24 V DC, width: 17.5 mm, plug-in spring-loaded terminals, monitoring of E-STOP, safety gates.
Read more
Pilz Safety Relay S7 750107 PNOZ S7 24VDC 4no/1nc

Pilz Safety Relay S7 750107 PNOZ S7 24VDC 4no/1nc

PNOZsigma contact expansion, outputs: 4 N/O, 1 N/C, UB 24 V DC, width: 17.5 mm, plug-in screw terminals, contact block for contact expansion in connection with safety-related control components.
Read more
PILZ Safety Relay PNOZ s5 24VDC 2 n/o 2 n/o t

PILZ Safety Relay PNOZ s5 24VDC 2 n/o 2 n/o t

Product ID: 750105. PNOZsigma safety relay (standalone), inputs: 1/2-channel wiring with/ without detection of shorts across contacts, manual/automatic start, outputs: 2 N/O, 2 N/O t-d (t = 0.04 - 300 s), 1 SC, UB = 24 V DC, width: 22.5 mm, plug-in screw terminals, monitoring of E-STOP, safety gates, light curtain.
Read more

Filter Products

Categories