Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- A unique earth ground tester that performs fast, accurate testing with and without stakes
- Tests 3- and 4-pole fall-of-potential, and 4-pole soil resistivity (with stakes)
- Performs selective earth ground rod testing (one clamp + stakes)
- Performs stakeless earth ground rod testing (two clamps)
- Features IP56 rating for outdoor use
Key features
Read more
- Continuous touchscreen IR-Fusion™
- 5 hours battery life
- Can withstand drop up to 2 meter
- Water and dust resistant—IP54 enclosure rating
- Automatically organize and file thermal images with
- Fluke Connect™ Asset Tagging
- 120 x 90 infrared resolution
Digital Combined pH/ORP Sensor Memosens CPS96D, Digital ORP Sensor Memosens CPS12E, Digital ORP Sensor Orbipore CPS92D, Digital pH Sensor Memosens CPS41E
Digital Combined pH/ORP Sensor Memosens CPS76D, Digital Conductivity Sensor Condumax CLS16D, Digital pH Sensor Memosens CPS61E
Digital Combined pH/ORP Sensor Memosens CPS16E, Digital non-glass pH Sensor Ceramax CPS341D, Digital pH Sensor Memosens CPS71E, Suspended Solids Sensor Turbimax CUS51D, Digital Conductivity Sensor Condumax CLS21D, Digital Oxygen Sensor Oxymax COS61D, Digital pH Sensor Memosens CPS31E, Digital ORP Sensor Ceraliquid CPS42D
Digital pH Sensor Memosens CPS91E, Digital pH Sensor Orbipac CPF81D, Digital Free Chlorine Sensor Memosens CCS51D, Digital Non-Glass pH SensorCeramax CPS341D
Immersion Assembly Dipfit CPA111, Memosens CPS77D
Read more
A pH sensor is a piece of scientific equipment that precisely calculates the acidity and alkalinity of water and other liquids. The majority of businesses, including power plants, pharmaceuticals, food and beverage, primary, chemicals, oil and gas, and wastewaters, depend on this equipment.
Read more
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more
Special Features:
■ Reliable and cost-effective ■ Design per EN 837-1 or ASME B40.100 ■ Nominal size 40 [1 ½"], 50 [2"], 63 [2 ½"], 80 [3"], 100 [4"] and 160 [6"] ■ Scale ranges to 0 ... 400 bar [0 ... 6,000 psi]Model: 111.12, back mount
Model: 111.10, lower mount (radial)
For industrial and commercial electricians, the Fluke 376 FC True-RMS
Clamp Meter with iFlex is the most sophisticated diagnostic instrument available.
The 376 is a member of the Fluke Connect series of wireless test equipment,
which uses Bluetooth connectivity to let you log, trend,
and monitor measurements while staying securely outside the arc flash zone.
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.