Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Through beam sensor
- 120 mm
- Pulsed red LED
- PNP
- Potentiometer, 270°
- Ponnector M8, 3 pin
- -10 … 60 °C
- IP 67
- PNP/NPN
- Light / Dark Operate
- RGB LED
- Intiuitive teach-in
- 20 ms delay activatable
- Optional lenses for distances up to 22 mm
With retro-reflective sensors, the transmitter and receiver are located in one housing and combined with a prismatic reflector. The reflector reflects the emitted light beam and if the light is interrupted by an object, the sensor switches.
Read more
By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
- The incremental HeavyDuty standard : HOG86 / POG86
- Unmatched variety, proven robustness : HOG9 / POG9
- The unrivalled benchmark : HOG10 / POG10
- The intelligent solution : HMG10P / PMG10P incremental
- SinCos output – LowHarmonics for outstanding signal quality: OGS71 ... HOGS151
- Solid shaft with EURO flange B10
- Complete portfolio of solid shaft designs
BANNER PHOTOELECTRIC SENSOR QS30 SERIES FEATURES:
- Innovative 30 mm housing design to suit almost any mounting requirement.
- High-power sensing with ranges up to 200 m.
- Available in opposed, high-power opposed, polarized and non-polarized retroreflective, diffuse, laser, fixed-field and adjustable-field and clear object sensing modes.
- Class 1 visible laser in diffuse and retroreflective models and Class 2 in diffuse models.
- Models with standard 10 to 30V dc supply voltage and bipolar NPN/PNP outputs or 24 to 250V ac/12 to 250V ac supply voltage with e/m relay output.
- Light- or dark-operate selectable or configurable, depending on model.
- IP67 or IP69K environmental rating, depending on model.
- Bright LED operating status indicators visible from 360°.
Features-
♦ Impulse counter.
♦ Adding.
♦ Display 6- or 8-digits.
♦ With or without a reset button.
♦ Socket housing.
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.






