Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Sensing range (max.): 8 mm
- Connection type: Connector M8, 3 pin
- Switching output: NPN
- Output function: NC
- Switching frequency: 500 Hz
- Installation type: Flush
For Price Call: 01329727092
Email: sales@voltecbd.com
- Through beam sensor
- 120 mm
- Pulsed red LED
- PNP
- Potentiometer, 270°
- Ponnector M8, 3 pin
- -10 … 60 °C
- IP 67
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 30 V AC/DC
- Number of conductors : 4
- Cable length: 3m
- Wire insulation : PVC
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- IP67 / IP65
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 3m
- Wire insulation : PVC
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- IP67 / IP65
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 2m
- Wire insulation : PP
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- IP67 / IP65
- Application: Oil and lubricant resistant
- Type of connection: Connector
- Operating voltage: 30 V AC/DC
- Number of conductors : 8
- Cable length: 10m
- Wire insulation : PP
- Thread size: M12
- Type: Female, No. of pins: 8 -pin
- IP67 / IP65
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 2m
- Wire insulation : PVC
- Thread size: M8
- Type: Female, No. of pins: 4 -pin
- PNP/NPN
- Light / Dark Operate
- RGB LED
- Intiuitive teach-in
- 20 ms delay activatable
- Optional lenses for distances up to 22 mm
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 5m
- Wire insulation : PVC
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- Encoding: A-coded .
- Type of connection: Connector.
- Operating voltage: Max. 30 V AC/DC.
- Number of conductors : 4.
- Cable length: 5m.
- Wire insulation : PVC.
- Thread size: M8.
- Type: Female.
- No. of pins: 4 -pin.
- Version Axial: Connector. LED: No.
- Lock: Screw fitting.
- Nickel-plated diecast zinc.
- Recommended torque 0.6 Nm.
- Self-locking.
With retro-reflective sensors, the transmitter and receiver are located in one housing and combined with a prismatic reflector. The reflector reflects the emitted light beam and if the light is interrupted by an object, the sensor switches.
Read more
- The incremental HeavyDuty standard : HOG86 / POG86
- Unmatched variety, proven robustness : HOG9 / POG9
- The unrivalled benchmark : HOG10 / POG10
- The intelligent solution : HMG10P / PMG10P incremental
- SinCos output – LowHarmonics for outstanding signal quality: OGS71 ... HOGS151
- Solid shaft with EURO flange B10
- Complete portfolio of solid shaft designs
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more
Features-
♦ Impulse counter.
♦ Adding.
♦ Display 6- or 8-digits.
♦ With or without a reset button.
♦ Socket housing.
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.








