Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Vision Sensor
- Camera-based compartment fine positioning
- Operational Controls: Button
- Interface: Ethernet
- Supply: 18-20VDC
- Light Section Sensor
- Application : 3D object detection
- Contains: LxSsoft configuration software
- Response Time: 10ms
- DIA: 18MM
- RANGE: 2-8MM
- OUTPUT: NPN-NC
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 18MM
- RANGE: 2-8MM
- OUTPUT: PNP-NO
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 30MM
- RANGE: 2-20MM
- OUTPUT: NPN-NC
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 30MM
- RANGE: 2-20MM
- OUTPUT: PNP-NO
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 30MM
- RANGE: 2-20MM
- OUTPUT: NPN-NO
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more
Operating range 1-30 mm, switching frequency up to 100 Hz.
Certifications: CE.
Housing material: Plastic / brass, nickel-plated.
Connector and cable variants.
Part no.: 50136628
Read more
Applications
■ Calibration service companies and service industry.
■ Measurement and control laboratories.
■ Pressure tests.
Special features
■ Digital indicator with interchangeable pressure sensors (plug-and-play).
■ Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi].
■ Type of pressure: Positive and negative overpressure,absolute pressure and differential pressure.
■ Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate).
■ Data logger for recording measured values.
Read more

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.