Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
Narrow design:
- Space-saving housing, just 10 mm wide.
- Beam spacings between 5 and 100 mm
- 5 m operating range and measurement field lengths up to 3100 mm
Standard design
- 4 configurable inputs/outputs and IO-Link interface
- Response time of just 30 μs for very fast processes
- Lateral housing groove enables very flexible mounting
Reflection principle
- Reflection principle with operating range up to 700 mm
- Detection of small objects (e.g., 10 x 10 x 1 mm) at up to 3.5 m/s
- Readjustment when soiled, warning output for prefailure messages
Special Features:
■ Reliable and cost-effective ■ Design per EN 837-1 or ASME B40.100 ■ Nominal size 40 [1 ½"], 50 [2"], 63 [2 ½"], 80 [3"], 100 [4"] and 160 [6"] ■ Scale ranges to 0 ... 400 bar [0 ... 6,000 psi]Model: 111.12, back mount
Model: 111.10, lower mount (radial)
A robust, Ø78 mm, programmable hollow shaft angle transmitter
detects the angular position of a shaft without making contact with it and
transforms the information into an impressed direct current proportional to the measured value.
Features:-
-
Hollow-shaft angle-of-rotation transmitter with a tough, weatherproof design.
-
Highest level of electrical and mechanical safety.
-
Advanced capacitive scanning system.
-
Easy axis or shaft mounting.
-
Installing a continuous shaft.
-
Enduring, upkeep-free, and simple to install.
-
Shake- and vibration-resistant.
-
Keys and switches can be used to parameterize the measuring range, rotational direction, zero point, and characteristic curve (linear/V).
-
Analog output signal, 2-wire connector, 4...20 mA.
-
Independently adjustable zero point and span.
-
Due to the capacitive scanning mechanism, the absolute position is immediately available after turning on.
An angle proportional inclination is transformed into a DC signal using the KINAX N702.
An analog current change (4–20 mA) that represents the output signal is accessible.
There is little mechanical wear on the pendulum from the sensor, which is non-contact.
Features:-
- Magnetoresistive inclination transducer
- Digital interfaces CANopen
- Robust aluminum housing
- Protection class IP66
- Oil damped pendulum
- Pendulum shaft without mechanical stop
Applications
■ Calibration service companies and service industry.
■ Measurement and control laboratories.
■ Pressure tests.
Special features
■ Digital indicator with interchangeable pressure sensors (plug-and-play).
■ Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi].
■ Type of pressure: Positive and negative overpressure,absolute pressure and differential pressure.
■ Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate).
■ Data logger for recording measured values.
Read more

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.