Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- 10Nm,
- 24Vac/Vdc
- Modulating control
- Non-Spring return Voltage Feedback Signal and without aux
- Switch
Medium | Compressed Air |
---|---|
Operating Temperature | 5 ... 176 °F |
Standard | VDMA 24 345 |
Actuation | Sol/Sol |
ISO Size | ISO #1 |
Operation | 5/2 |
Materials - Body | Diecast aluminium |
Materials - Nuts/Screws | Zinc plated steel |
Materials - Seals | Nitrile rubber |
Certification - WEEE | WEEE |
Classification - eClass 11 | 51030190 |
Range | SXE |
Series | ISO Star |
Brand | Norgren |
VersaFlow Magnetic Flowmeters are highly versatile, customizable and offer precise flow measurement for conductive liquids, pastes and slurries.
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more
In order to avoid the pricey installation of two or more separate devices, the Rosemount 8800 MultiVariable Vortex Flow Meter integrates temperature and flow sensors into a single, extremely precise instrument. The integrated, detachable temperature sensor, which is isolated from the process and distinct from the Vortex flow sensor, delivers a precise process temperature measurement. It also offers temperature and pressure compensation, providing compensated mass flow and corrected volume in steam and liquid applications when the input comes from an external HART® pressure transmitter.

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.