SICK Glare Sensor: Glare OPR20G-RB317537 | Part No: 1068822
- Sensor principle: Delta‑S‑Technology®
- Switching output: Push‑pull: PNP/NPN
- Switching output (voltage): Push‑pull: PNP/NPN (High: VS − 3 V, Low: < 3 V)
- Light source: LED, visible red light
- Light spot size: 10 mm × 12 mm
- Wavelength: 640 nm
- Sensing distance:
Description
SICK Glare Sensor: Glare OPR20G-RB317537 | Part No: 1068822
Glare The authority on gloss
The Glare sensor is specially designed to recognize and differentiate objects on the basis of their gloss in order to control production processes. The Glare sensor analyzes the spatial distribution of reflected light using Delta-S technology, which allows the sensor to determine the gloss level of flat object surfaces and to differentiate between objects of differing gloss levels. The measurement result is transmitted to the process controls either via two digital switching outputs or IO -Link.Several operating modes are available, making the Glare sensor perfectly suited to a range of different applications. The combination of intelligent signal evaluation algorithms, the multi-sensor arrangement and sensitivity adjustments ensure increased operational safety in industrial applications. The Glare’s IO -Link interface enables the sensor to be integrated into the machine controller, featuring automatic, process-oriented configuration and online diagnostics.
Glare AT A GLANCE
Benefits
- Quick installation via alignment mode
- Integrated key lock reduces the risk of operating errors and tampering
- Sensitivity adjustments increase the system’s operational safety
- Teach-in via the single teach-in button or SOPAS operating software facilitates quick and easy operation
- Reliable gloss identification regardless of color, labeling or structure increases operational safety
- State-of-the-art detection method makes it possible to conduct inspections at lower costs than with camera solutions
- Sensor’s resistance to object fluctuations increases operational safety
- Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link
Features
- Object detection and differentiation on the basis of surface gloss level
- Configurable in many different operating modes to meet the requirements of any application
- Integrated alignment aid
- Integrated automation functions
- Two digital push-pull outputs and one configurable input
- Sensitivity adjusts to object properties
- IO-Link provides easy data access from the PLC
- Quick and easy configuration
Technical details
Features
| Sensor principle | Delta-S-Technology® |
| Housing design | Middle |
| Dimensions (W x H x D) | 42.5 mm x 44 mm x 43.4 mm |
| Light source | LED, visible red light 1) |
| Light spot size | 10 mm x 12 mm |
| Wave length | 640 nm |
| Sensing distance | ≤ 50 mm |
| Sensing distance tolerance | ± 5 mm |
| Tilt angle tolerance | ± 5° |
| Minimum detectable object (MDO) | 12 x 14 mm |
| Sensitivity | Fine, middle, coarse |
| Object speed max. | 2 m/s 2) |
| Adjustment | Potentiometer, cable, IO-Link, Single teach-in button (Sensitivity (Q, Q/, teach-in), Teach-in / Keylock, Teach-in) 3) 4) |
| Teach-in mode | Static 1-point teach-in
Static 2-point teach-in Dynamic 2-point teach-in Static 3-point teach-in |
1) Average service life: 100,000 h at TU = +25 °C.
2) Minimum object size.
3) HIGH = > VS – 2 V / LOW = open or < 2 V.
4) Default: teach-in.
Interfaces
|
|||||||||
| Cycle time | 2.3 ms | ||||||||
| Process data structure | Bit 0 = switching signal QL1
Bit 1 = switching signal QL2 Bit 2 = Quality of Run Alarm Bit 3 = Teach successful Bit 4 = Teach busy Bit 5 … 15 = empty |
||||||||
Electronics
| Supply voltage | 10 V DC … 30 V DC 1) | ||||
| Ripple | ≤ 5 Vpp 2) | ||||
| Current consumption | < 150 mA 3) | ||||
| Switching frequency | 500 Hz 4) | ||||
|
|||||
| Jitter | 500 µs | ||||
| Number of switching outputs | 2 (Q1, Q2) | ||||
| Switching output | Push-pull: PNP/NPN | ||||
| Switching output (voltage) | Push-pull: PNP/NPN (High: VS – 3 V, Low: < 3 V) | ||||
| Output current Imax. | < 100 mA 5) | ||||
| Initialization time | < 2.5 s | ||||
| Switch-on delay | 0 s … 30 s | ||||
| Off delay | 0 s … 30 s | ||||
| Pulse duration | ≤ 30 s | ||||
| Protection class | III | ||||
| Circuit protection | A 6)
C 7) D 8) |
||||
|
|||||
1) Limit values when operated in short-circuit protected network: max. 8 A.
2) May not fall below or exceed UV tolerances.
3) Without load.
4) With light/dark ratio 1:1.
5) Consumption count Q1 / Q2.
6) A = VS connections reverse-polarity protected.
7) C = interference suppression.
8) D = outputs overcurrent and short-circuit protected.
Mechanics
| Housing material | ABS |
| Weight | 130 g |
Ambient data
| Ambient operating temperature | –10 °C … +55 °C |
| Ambient temperature, storage | –25 °C … +75 °C |
| Ambient light immunity | > 50 klx |
| Shock load | According to EN 60068-2-27, single shock (30 g/11 MS), continuous shock (25 g/11 MS) |
| Enclosure rating | IP67 |
| UL File No. | NRKH.E181493 |
Datasheet: PDF
More Sick Glare Sensors:
Sick OPR20G-RB417537 | Part no.: 1068823 ; Sick OPR20G-RB517537A01 |Part no.: 1072051 ; Sick OPR20G-RB111517 Part no.: 1065685 ; Sick OPR20G-RB317537A90 Part no.: 1072052
Why Choose Voltec Engineering Limited?
At Voltec Engineering Limited, we are proud to be the authorized distributor of Leuze Electronic in Bangladesh. As a trusted Leuze sensor supplier in Bangladesh and leading industrial automation supplier Bangladesh, we deliver photoelectric sensors, diffuse sensors, retroreflective sensors, through-beam sensors, barcode scanners, safety light curtains, inductive sensors, optical sensors, and machine safety products.
We ensure top-quality Leuze sensors in Bangladesh, backed by exceptional technical support and a wide range of automation solutions in Bangladesh. Our experienced team provides guidance on sensor selection, PLC programming, HMI integration, VFD and inverter panels, and automation project design to meet your requirements. With ready stock and fast delivery, Voltec Engineering Limited is your reliable Leuze distributor Bangladesh.
For assistance or to place an order, don’t hesitate to contact us. Voltec Engineering is here to support you with Leuze Electronic Bangladesh, photo sensor Bangladesh, Sick Sensor Supplier in Bangladesh, automation spare parts Bangladesh, PLC and HMI supplier Bangladesh, VFD and inverter supplier Bangladesh, and industrial sensors Bangladesh — ensuring efficiency, precision, and reliability in your operations.
Related products
