Capacitance Level Transmitter

TRUMEN Two-Wire Capacitance Type Level Transmitter TLC2

Add to Wishlist
Add to Wishlist

♦ Free flowing homogeneous liquids Like oil, raw water, WFI, DM/DI water etc.

♦ Suitable for mounting on the top.

♦ Maximum process temperature: 200 ºC.

♦ Maximum process pressure is 20 bars.

♦ Able to handle caustic liquids.

Category:
Tags:

Description

TRUMEN Two-Wire Capacitance Type Level Transmitter TLC2

Product Overview-

Trumen two wire capacitance type level transmitter model TLC2 is suitable for liquid & solid application like powder, slurry, chemical, edible oil etc. Trumen TLC2 is a fully, partially PTFE & ceramic insulated and used as a robust rod probe and flexible rope probe for level detection.

Applications-

Capacitance level transmitter probe is used in different applications like

  • Oil.
  • Water.
  • WFI.
  • DM/DI water.
  • Corrosive liquids.
  • Wheat flour..
  • Rice paddy.
  • Granuels.
  • Chemical.
  • WTP.
  • STP.
  • Cement.
  • Steel.
  • Food & Beverages..
  • Diesel.

Features:-

  • Compact size.
  • Fast response time.
  • Compensation against material build-up..
  • Easy calibration via DIP switch.
  • Suitable for top mounting.
  • Fluid Turbulation Stability.
  • 4-20mA isolated output or 1-5V & 2-10V output.
  • Ingress protection: IP 67/68 (as per IS/IEC 60529:2001).
  • Process temperature max 300°C.
  • Process pressure max. 20 bar.
  • Threaded / Flanged / customized process connections.
  • Rigid rod / flexible rope probe version.
  • Remote electronics with as standard 2 meters cable length.

Performance Specifications:-

Parameter Description
General

Min. Dielectric Constant

 1.8 (non-hygroscopic)
Maximum measured error Max. ±1 mm (at reference operating conditions)
Repeatability 1 mm
Accuracy ±1%
Hysteresis Approx. 2 mm
Influence of medium Max +2 to -3 mm (-20 to +150 °C)
Influence of medium pressure Max 0 to -3 mm (-1 to 20 bar)
ICT to TLC cable Shielded 2 Core PVC cable with 1 to 1.5 mm2 conductors cross-section
Process
Ambient Temperature -20°C … 70°C (-4°F … 158 °F)
Process Temperature -20°C … 100°C (-4°F … 212 °F)
Extended Process Temperature

 

 PTFE Insulation: -30°C … 250°C (-22 °F … 482 °F), *Ceramic Insulation: -30°C … 300°C (-22°F … 572°F),(extensions & heat sinks required)

(*Note- Ceramic part insulation probe suitable for non-conductive or low dielectric material only)
Process Pressure

 

 absolute / max. 20 bar (for ceramic insulation : 1 atm)
Physical Specifications
Wetted Parts

 

 SS 304, SS 316, SS 316L, PTFE, Part Ceramic

 
Process Connections

 

 NPT / BSP 1″, 1-1⁄4″, 1-1⁄2″, 2″ & TC 1-1/2″, 2″ & Flanged ANSI / JIS / DIN / ASA / custom
Probe Insertion Length Rigid Rod Probe: 50mm to 3,000mm, Flexible Rope Probe: 100mm to 20,000mm

DATA SHEET –PDF