Inductive
ISS 208MM/4NO-2E0 Inductive switch

LEUZE ISS 208MM/4NO-2E0 Inductive Switch

Add to Wishlist
Add to Wishlist
INDUCTIVE SENSOR-
Cylindrical inductive switch, working range Sa: 0-1.6 mm, 35 m length, 2000 mm cable connection, 
one output with typically open PNP switching, supply voltage: 10-30 V DC, embedded installation, and IP 67 protection.

Part no.: 50146967.

Category:
Tags:

Description

Inductive switch ISS 208MM/4NO-2E0 

Inductive Switch

Advanced sensors

Excellent technology and the highest quality standards form the basis of the IS 200 series, making them a reliable sensor in nearly all areas of application. The product range includes all common cubic and cylindrical standard and miniature designs and short and long designs. For designs M12 to M30 and 40×40, sensors are also available with complementary switching outputs (NO+NC) and 3x switching distance.

Cylindrical standard sensors:-

IS 208, IS 212, IS 218, IS 230

Housing M8; M12; M18; M30
Scanning range 1.5….. 15.0 switching
g frequency p to 5,000 Hz

♦ Sensor for every application with finely graduated scanning ranges in all diameters.

♦ Short housing models available for use in confined spaces.

♦ Larger operating ranges than with average available comparable types.

♦ Bright status LEDs at the connection with the display of the function reserve (flashing LED).

♦ NPN / PNP or ambivalent outputs.

Sensors for higher requirements:-

IS 208, IS 212, IS 218, IS 230

Housing M8; M12; M18; M30
Scanning range 3.0….. 40.0 switching
g frequency Up to 1,000 Hz

Stainless steel models:-

♦ Full function range in V4A housing.

♦ For demanding environmental conditions.

Large scanning range

♦ Very large scanning ranges, also for detecting moving parts in a compact housing.

♦ High sensitivity for the detection of small parts.

AC/DC device versions

♦ Devices with very large supply voltage range of 20 V to 240 V AC/DC

♦ Stainless steel sleeve

♦ Simple 2-wire connection

Material independence (correction factor 1)

♦ The same switching distances with various materials.

♦ Extremely stable switching behavior for high functional reliability.

Inductive switch ISS 208MM/4NO-2E0

Technical data:-

Series:- 208.

Typ. operating range limit Sn: –2 mm.

Operating range Sa  :-   0…… 1.6 mm.

Electrical data:-

Protective circuit :- Inductive protection ,Polarity reversal protection, Short circuit protected.

Performance data:-

Supply voltage UB                                         10 … 30 V, DC .

Residual ripple                                                0 … 20 %, From UB.

Open-circuit current                                     0 … 10 mA.

Temperature drift, max. (in % of Sr)    10 %, Over the entire operating temperature range.

Switching hysteresis                                    10 %.

Switching outputs:-

Voltage type :-  DC .

Switching current, max.:_   200 mA.

  Residual current, max.  :_     0.1 mA   .

Voltage drop:- ≤ 2 V.

Switching element :- Transistor, PNP.

Switching principle :-NO (normally open).

Time behavior

Switching frequency :-5,000 Hz.

Readiness delay :- 32 ms.

Mechanical data:-

Design: -Cylindrical.

Thread size  :- M8 x 1 mm.

Dimension (Ø x L):-8 mm x 22 mm.

Type of installation:- Embedded.

Housing material:-  Stainless steel.

Sensing face material:-Plastic, Polyamide (PA 12).

 

Type of fastening:-Mounting thread via optional mounting device.

Time behavior:-

Switching frequency:-  5,000 Hz.

Readiness delay:- 32 ms.