Description

Danfoss Micro Drive Inverter FC 51 VLT

Specification:-

Danfoss VLT Micro Drive FC 51 Series AC Frequency Inverter 0.37kW (0.5HP) 400V VxF for 3 phase motor and 1.2A from Sensor less Vector Control (VVC).

Local Control Panel (Keypad) 132B0101 – Supplied with Potentiometer.

Output current rating: 1.2A.

Overload: 150% x 60 seconds.

Size: M1 – 70 mm wide x 155.6 mm deep x 150 mm high. IP20.

Weight: 1.1 kg.

Speed control range: 0-200 Hz (VVC +), 0-400 Hz (VxF).

Braking (DBr): Not fitted.

The keypad (HMI) is provided as an additional item that will be fixed in front of the FC 51 unit.

2 x analog input, 5 x digital input, 1 x analog output, 1 x relay communication set.

Contact: RS485 (twin-wire); FC Protocol, Modbus RTU.

Danfoss MCT 10 is programmable from a PC via software. (Via RS485 port)

Input current: 2.6A max.

Input voltage: 380-480V ± 10% at 50-60Hz.

EMC filter: IEC / EN 61800-3 secondary environment (industrial); First environment with restrictions – C2

Cubicle mount.

Surrounded: Rated at 40 C.

Ventilation space above and below: 100 mm.

Side ventilation space: 0 mm (drives can be mounted side by side).

Maximum output heat loss: 25.5W.

Mounted: 4 x 5 mm diameter hole in the center of 59 x x 166.4 mm.

Full part number (excluding keypad): 132F0017.

Local Control Panel (Keypad) Part Number: 132B0101.

Note: 2 separate items, FC 51 drive unit and FC 51 are provided as separate keypads for front mounting.

Type code: FC-051PK37T4E20H3.