Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Output: Analog
- Stroke Length: 50 - 2540 mm
- Resolution: Infinite
For Price Call: 01329727092
Email: sales@voltecbd.com
- Output: CANopen
- Stroke Length: 50 - 2540 mm
- Resolution: 10 µm
For Price Call: 01329727092
Email: sales@voltecbd.com
- Output: IO-Link
- Stroke Length: 50 - 2540 mm (2 - 100 in.)
- Resolution: 5 µm
- Multi-Position: Up to 8 positions
For Price Call: 01329727092
Email: sales@voltecbd.com
- Output: Analog Voltage
- Stroke Length: 50 - 2540 mm
- Resolution: Unendlich
For Price Call: 01329727092
Email: sales@voltecbd.com
- Output: Analog Current
- Stroke Length: 25 - 6350 mm
- Resolution: 16 bit
For Price Call: 01329727092
Email: sales@voltecbd.com
- Output: Analog Voltage
- Stroke Length: 25 - 7620 mm (1 - 300 in.)
- Resolution: Infinite
For Price Call: 01329727092
Email: sales@voltecbd.com
- Output: EtherCAT®
- Stroke Length: 25 - 7615 mm (1 - 299.8 in.)
- Resolution: 0.5 µm
For Price Call: 01329727092
Email: sales@voltecbd.com
- Output: Analog Voltage
- Stroke Length: 25 - 5080 mm (1 - 200 in.)
- Resolution: 16 bit
For Price Call: 01329727092
Email: sales@voltecbd.com
- Output: POWERLINK
- Stroke Length: 25 - 6350 mm (1 - 250 in.)
- Resolution: 0.5 µm
For Price Call: 01329727092
Email: sales@voltecbd.com
- Output: PROFINET
- Stroke Length: 25 - 7620 mm (1 - 300 in.)
- Resolution: 0.5 µm
For Price Call: 01329727092
Email: sales@voltecbd.com
- For standard applications
- Position measurement with more than one magnet
- Ideal for limited installation space
For Price Call: 01329727092
Email: sales@voltecbd.com
Superior performance rod position sensors for demanding applications
- In in-cylinder applications the sensing element & electronics can be easily replaced without interrupting the hydraulic circuit
- Multi-position measurement with up to 20 magnets
- LEDs for sensor status & diagnostics
- Outputs: CANbus, Profibus, DeviceNet
For Price Call: 01329727092
Email: sales@voltecbd.com
- Available in stainless steel 1.4404 (AISI 316L)
- Operating temperature up to +105 °C (+221 °F)
- ATEX / IECEx / CEC / NEC / CCC certified
- Programmable set points
- Outputs: Analog, SSI, Start/Stop
- Available as
- rod version for cylinder integrated position measurement
- profile version for position measurement of a motion axis
- Available in stainless steel 1.4404 (AISI 316L)
- Operating temperature up to +105 °C (+221 °F)
- ATEX / IECEx / CEC / NEC / CCC certified
- Programmable set points
- Outputs: Analog, SSI, Start/Stop
- Available as
- rod version for cylinder integrated position measurement
- profile version for position measurement of a motion axis
By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.














