Filter

Showing all 6 resultsSorted by latest

Sort:
Show:
IFM Flow Monitor SI5000

IFM Flow Monitor SI5000

  • Reliable monitoring of liquids and gases in pipes
  • Variable process connection using adapters
  • Easy setting of the switch points for quick set-up
  • Robust stainless steel housing for use in harsh industrial environments
  • LED bar graph for indication of switch point and flow
Read more
Ex-tech Solution XUWB9APBNL2 Explosion proof (ATEX) Photocells XUWB Series

Ex-tech Solution XUWB9APBNL2 Explosion proof (ATEX) Photocells XUWB Series

With a footprint diameter of only 30 mm these prewired photocells, certified ATEX Ex d, can be used in all types of applications and processes. With a nominal range from 0.6 m to 15 m, it will be able to meet all needs.
Read more
Ex-tech Solution XMLW-C010B2S12 Explosion proof (ATEX) Pressure switches XML Series

Ex-tech Solution XMLW-C010B2S12 Explosion proof (ATEX) Pressure switches XML Series

With a wide range of pressures, from 0.1 to 500 bars, the XMLW pressure switches allow to control luids in hazardous areas. Technor They meet the highest level of protection for the explosive atmospheres.
Read more
UWT Radar Sensor NivoGuide – NG 8100

UWT Radar Sensor NivoGuide – NG 8100

  • Continuous Level Measurement
  • Interface Level Measurement
  • Liquids
Read more
UWT Rotary Paddle Level Switch Rotonivo – RN 3001

UWT Rotary Paddle Level Switch Rotonivo – RN 3001

  • Point Level Measurement
  • Solids
  • Bulk weight > 15 g/l (> 0.9 lbs/ft3)
Read more
DWYER WATER LEAK DETECTOR SERIES WD3

DWYER WATER LEAK DETECTOR SERIES WD3

By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more

Filter Products

Categories