Filter

Showing all 5 resultsSorted by latest

Sort:
Show:
Autonics PSAN-01CA-RC1/8 – Digital Display Pressure Sensors

Autonics PSAN-01CA-RC1/8 – Digital Display Pressure Sensors

  • Applicable fluid : (Pneumatic type) Air, Non-corrosive gas
  • Pressure port direction : Rear fitting
  • Pressure port : Rc1/8
  • Connection type : Connector type(connector type cable: 2m)
  • Pressure type : Standard pressure
  • Power voltage : 12-24VDC specialstring ±10%(ripple P-P: max. 10%)
  • Current consumption : Voltage output type: Max. 50mA Current output type: Max. 75mA
  • Protection structure : IP40
For Price Call: 01329727092
Email: sales@voltecbd.com
Read more
Autonics BJX30M-TDT Through-Beam Sensor

Autonics BJX30M-TDT Through-Beam Sensor

  • Sensing type : Through-beam type
  • Sensing distance : 30m
  • Sensing target : Opaque material of min. Ø15mm
  • Light source : Red LED(660nm)
  • Response time : Max. 1ms
Read more
TESTO Thermal Imager 872

TESTO Thermal Imager 872

  • Maximum image quality is achieved with integrated testo SuperResolution Technology at 640 x 480 pixels and IR resolution of 320 x 240 pixels.
  • Thermal sensitivity of 0.05°C for precise measurement.
  • Clever and wireless, the testo 770-3 clamp meter and the testo 605i humidity measuring equipment can wirelessly send readings using your mobile device and the free testo Thermography App (both available separately).
  • Integrated laser marker - can also be precisely seen in the thermal image as a measuring point.
Read more
KUBLER INCREMENTAL ENCODER 2400

KUBLER INCREMENTAL ENCODER 2400

  Model: 2450 Ideal for the tightest installation spaces.
  • Magnetic – robust
  • Ideal for small devices
  • Wear-free
  • Dimension - Ø 24 mm
  • Resolution - 12 bits singleturn
  • Shaft type - Max 6 mm shaft, round
  • Max 5 mm shaft, with flat surface
Model: 2470 Ideal for the tightest installation spaces.
  • Magnetic – robust
  • Ideal for small devices
  • Wear-free
  • Dimension - Ø 24 mm
  • Resolution - 12 bits singleturn
  • Shaft type - Max 6 mm hollow shaft, blind hole
 
Read more
DWYER WATER LEAK DETECTOR SERIES WD3

DWYER WATER LEAK DETECTOR SERIES WD3

By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more

Filter Products

Categories