Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Through beam sensor
- 120 mm
- Pulsed red LED
- PNP
- Potentiometer, 270°
- Ponnector M8, 3 pin
- -10 … 60 °C
- IP 67
- Series : 50K
- Dimension : 28.5 x 80.5 x 62 mm
- Interface : PNP normally open (NO) PNP normally closed (NC)
- Principle of operation : Photoelectric sensor
- Principle of optical operation : Diffuse sensor, triangulation
By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
Pressure-rated inductive sensors
- Pressure-rated up to 500 bar
- High temperature-rated up to 120 °C
- Appropriate for use in explosion-protected areas
- Overall dimensions from M5 to M18
- Short and long configurations
- With and without fixed stop
Inductive standard sensors:
- Cylindrical sensors in designs from M5 to M30 and various cuboid configuration
- Variants for DC-3/4 wire, IO-Link and DC, AC and AC/DC 2 wire
- Shielded and unshielded versions
- Flush variants with ranges of up to 15 mm
- Non-flush variants with ranges of up to 30 mm
- Plug or cable connection
Special features:-
• Min/max value memory and display.
• Hold function.
• Taring function for weighing applications.
• Customer-specific linearization (40 value pairs or polynomial).
• Timer function.
• Four limit value monitoring functions.
• Individual user level.
• Separate application using structured text (ST code; option).
• Math and logic function (option).
• Fast wiring through Push-In technology.
• Analog output (option).
• RS485 or Ethernet interface (option).
• Additional analog and digital inputs via interface.
Read more
The JUMO di 308 signaling device shows standard signals in "simple text" as well as temperatures in °C or °F. The fundamental device is pre-configured with a voltage supply for two-wire transmitters, 1 analog input, 2 binary inputs, 2 relay outputs, and 2 logic outputs.
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.