Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Series : 50K
- Dimension : 28.5 x 80.5 x 62 mm
- Interface : PNP normally open (NO) PNP normally closed (NC)
- Principle of operation : Photoelectric sensor
- Principle of optical operation : Diffuse sensor, triangulation
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | |
| Measuring range |
|
| Electrical design | PNP/NPN |
Flush Pressure Transmitter PM1705
PL5400, PL5401, PL5402, PL5412, PL5423, PY2033, PL1502, PL1503, PL1504, PL1506, PL1512, PL1514, PL1515, PL1523, PL1543
Transmitters for Mobile Applications
PT500E, PT5500, PT560E, PT5560, PT501E, PT5501, PT504E, PT5504, PT503E, PT5503, PT502E, PT502E, PT5502, PT5600, PT700E, PT5700, PT701E, PT5701, PT704E, PT5704, PU500E, PU8500, PT703E, PT702E, PT5604, PU501E,
PU5703, PU8502, PU8503, PU8701, PU8702, PU8712, PU5701, PU5604, PU1732, PU5602, PU5660, PU5700, PU5702, PU5704, PU5760, PU5760, PU1760, PT9551, PT9550, PT5043,PT5060
Type PN / PE with Digital Display
PN7071, PN2094, PN 7092, PN7094, PN7093,PN3094, PN7070, PN3071, PN2071, PN2294, PN7294, PN3092, PN7096, PY9170, PN2696, PE2094, PE2099, PE2591
Read more
Model: 2450
Ideal for the tightest installation spaces.
Read more
- Magnetic – robust
- Ideal for small devices
- Wear-free
- Dimension - Ø 24 mm
- Resolution - 12 bits singleturn
- Shaft type - Max 6 mm shaft, round
- Max 5 mm shaft, with flat surface
- Magnetic – robust
- Ideal for small devices
- Wear-free
- Dimension - Ø 24 mm
- Resolution - 12 bits singleturn
- Shaft type - Max 6 mm hollow shaft, blind hole
By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
Pressure-rated inductive sensors
- Pressure-rated up to 500 bar
- High temperature-rated up to 120 °C
- Appropriate for use in explosion-protected areas
- Overall dimensions from M5 to M18
- Short and long configurations
- With and without fixed stop
Inductive standard sensors:
- Cylindrical sensors in designs from M5 to M30 and various cuboid configuration
- Variants for DC-3/4 wire, IO-Link and DC, AC and AC/DC 2 wire
- Shielded and unshielded versions
- Flush variants with ranges of up to 15 mm
- Non-flush variants with ranges of up to 30 mm
- Plug or cable connection
- In order to ensure quality, completeness, position, and existence.
- Verification of contours without regard to orientation.
- Independent gadget with built-in lighting.
- User-friendly, intuitive handling.
- An Ethernet interface with high throughput for data transmission.
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.