Filter

Showing all 5 resultsSorted by latest

Sort:
Show:
Barksdale Temperature Switch with IO-Link Option BTS3000

Barksdale Temperature Switch with IO-Link Option BTS3000

Features:-
  • Measuring range: -22° to +284°F (-30° to +140°C).
  • One or two switch points Analog output 4 - 20 mA or 0 - 10 V.
  • Display & electronic connection: rotatable by 320°.
  • Simple navigation menu.
  • Superior EMI protection.
  • 0.50% accuracy.
  • Enclosure Rating: Type 4X (IP65) / Type 6 (IP67).
  • IO-Link Communication Protocol option.
Read more
Baumer Retro-reflective Sensors FPDM 12P5101/S35A

Baumer Retro-reflective Sensors FPDM 12P5101/S35A

With retro-reflective sensors, the transmitter and receiver are located in one housing and combined with a prismatic reflector. The reflector reflects the emitted light beam and if the light is interrupted by an object, the sensor switches.
Read more
BARKSDALE PRESSURE TRANSDUCER SERIES 420,422

BARKSDALE PRESSURE TRANSDUCER SERIES 420,422

Features:

  •  General purpose, industrial grade transducer
  •  Diffused silicon sensor for high accuracy and reliability
  •  Rugged stainless steel construction
  •  Built-in pressure snubber for high pressure applications (2000 psi and above)
  •  Wide range of electrical connections available

Applications

  •  Oil pressure hydraulics
  •  Cranes
  •  Presses
  •  Gas metering
  •  HVAC
  •  Medical equipment
Read more
AECO VIBRATION LEVEL CONTROLS

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000
Read more
WATSON MARLOW 600 SERIES CASED PUMP

WATSON MARLOW 600 SERIES CASED PUMP

Technical Summary

Max. flow rate 18 L/min
Min. flow rate 0.001 L/min
Max. flow rate 301 USGPH
Min. flow rate 0.02 USGPH
Drive speed control ratio 2650:1
Operating temperature range 5 to 40 °C
Operating temperature range 41 to 104  °F
Control types EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA
Drive standards CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements)
Drive ingress rating IP31, IP66, NEMA 2, NEMA 4X
Drive power supply 100-120 V/200-240 V 1ph 50/60 Hz 250 VA
Compatible tubing bore size
Read more

Filter Products

Categories