Filter

Showing all 4 resultsSorted by latest

Sort:
Show:
DWYER WATER LEAK DETECTOR SERIES WD3

DWYER WATER LEAK DETECTOR SERIES WD3

By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
WATSON MARLOW 500 SERIES CASED PUMP

WATSON MARLOW 500 SERIES CASED PUMP

Technical Summary:

Max. flow rate 3500 ml/min
Min. flow rate 0.004 ml/min
Max. flow rate 56 USGPH
Min. flow rate 0 USGPH
Drive speed control ratio 2200:1
Operating temperature range 5 to 40 °C
Operating temperature range 40 to 104  °F
Control types EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA
Drive standards CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements), RoHS
Drive ingress rating IP31, IP66, NEMA 2, NEMA 4X
Drive power supply 115/230 V 1ph 50/60 Hz 135 VA
Compatible tubing bore size 0.5, 1.6, 3.2, 4.8, 6.4, 8, 9.6 mm
Read more
ACS-CONTROL SYSTEM DATA LOGGER DLF4

ACS-CONTROL SYSTEM DATA LOGGER DLF4

Independent data logger and IOT Gateway

♦Power supply options come in a variety of forms. ♦Using the most effective source for communication. ♦with up to 7 sensors and 12 measurement types.  
Read more
WIKA Hand-Held Pressure Indicator CPH6200

WIKA Hand-Held Pressure Indicator CPH6200

Applications ■ Calibration service companies and service industry. ■ Measurement and control laboratories. ■ Pressure tests. Special features ■ Digital indicator with interchangeable pressure sensors (plug-and-play). ■ Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi]. ■ Type of pressure: Positive and negative overpressure,absolute pressure and differential pressure. ■ Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate). ■ Data logger for recording measured values.
Read more

Filter Products

Categories