Siemens Digital Output Module 6ES7-132- 4BF00-0AA0
Add to Wishlist
Add to Wishlist
Electronics module for ET 200S, 8 DO 24 V DC/0.5 A, 15 mm width.
Description
Siemens Digital Output Module 6ES7-132- 4BF00-0AA0
| Supply voltage | ||
| Reverse voltage protection | Yes | |
| Load voltage L+ | ||
| ● Rated value (DC) | 24 V | |
| ● Reverse polarity protection | Yes | |
| Input current | ||
| from load voltage L+ (without load), max. | 5 mA; Per channel | |
| from backplane bus 3.3 V DC, max. | 10 mA | |
| Power loss | ||
| Power loss, typ. | 1.5 W | |
| Address area | ||
| Address space per module | ||
| ● Address space per module, max. | 1 byte | |
| Digital outputs | ||
| Type of digital output | Source output (PNP, current-sourcing) | |
| Number of digital outputs | 8 | |
| Short-circuit protection | Yes | |
| ● Response threshold, typ. | 1.5 A | |
| Limitation of inductive shutdown voltage to | Typ. L+ (-55 to -60 V) | |
| Controlling a digital input | Yes | |
| Switching capacity of the outputs | ||
| ● on lamp load, max. | 5 W | |
| Load resistance range | ||
| ● lower limit | 48 Ω | |
| ● upper limit | 3 400 Ω | |
| Output voltage | ||
| ● for signal “1”, min. | L+ (-1.0 V) | |
| Output current | ||
| ● for signal “1” rated value | 0.5 A | |
| ● for signal “1” permissible range, min. | 7 mA | |
| ● for signal “1” permissible range, max. | 600 mA | |
| ● for signal “0” residual current, max. | 0.3 mA | |
| Output delay with resistive load | ||
| ● “0” to “1”, max. | 300 µs | |
| ● “1” to “0”, max. | 600 µs | |
| Parallel switching of two outputs | ||
| ● for uprating | No | |
| ● for redundant control of a load | Yes | |
| Switching frequency | ||
| ● with resistive load, max. | 100 Hz | |
| ● with inductive load, max. | 2 Hz | |
| ● on lamp load, max. | 10 Hz | |
| Total current of the outputs | ||
| ● Current per module, max. | 4 A | |
| Cable length | ||
| ● shielded, max. | 1 000 m | |
| ● unshielded, max. | 600 m | |
| Interrupts/diagnostics/status information | ||
| Diagnostics function | No | |
| Diagnostics indication LED | ||
| ● Status indicator digital output (green) | Yes | |
| Parameter | ||
| Remark | 3-byte parameter (not accessible for the user) | |
| Potential separation | ||
| Potential separation digital outputs | ||
| ● between the channels | No | |
| ● between the channels and backplane bus | Yes | |
| Isolation | ||
| Isolation tested with | 500 V DC | |
| Dimensions | ||
| Width | 15 mm | |
| Height | 81 mm | |
| Depth | 52 mm | |
| Weights | ||
| Weight, approx. | 40 g | |
Related products
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.